MotionVox ®

Turn a PowerPoint deck into a presentation video automatically

The whole path: from a PowerPoint deck to a video

Slide to Video Studio creates explainer videos from PowerPoint files in five steps: upload, style, presenter, slides and script, and finish. The script and narration are drafted automatically and can be fixed line by line.

The example is a five-slide briefing deck on the benefits of a generative-AI chat platform for small and midsize companies. It is a sample report produced by DeepResearch in Bestllam (https://bestllam.com), our own service, loaded as it is. The presenter is Sophia. Figures and cases inside the deck are the deck’s own and have not been verified by MotionVox.

In this example, preparing the script and narration took about three and a half minutes, and generating and exporting about six. Five slides became 23 lines and a 3 minute 20 second video. Use the links under “Continue with” to open the tutorial for each stage.

Some figures were captured by reopening the same project after the video was finished, so every step is ticked and lines are already split. The controls are in the same places.

Open Bestllam, our own service ↗

4 stepsActual product screenshots

Watch the finished example

This is the finished video exported during the walkthrough, rather than a recording of the editing interface.

Benefits of a generative-AI chat platform for small and midsize companies — an explainer made from a PowerPoint deck

A 3 minute 20 second example exported from a five-slide briefing deck in Slide to Video Studio, with narration by Sophia, captions and emphasis. The voice is Kasumi Nagisa, the first recommendation for Sophia; body motion is low/low/low. This deck is a sample report produced by DeepResearch in Bestllam (https://bestllam.com), our own service. Figures and cases in the deck are quoted by the deck from its sources and have not been verified by MotionVox.

200.1 seconds · Open the video in a new tab ↗

BEFORE YOU START

Before you start

Prepare the PowerPoint file (.pptx) you want to turn into a video and open the MotionVox home screen. The tutorials in this chapter follow the same five-slide deck.

Screenshots show actual sample projects. Your interface may vary with your plan and updates. Instructions describe desktop browser operation; this guide can also be read on a phone.

STEP01

The work moves through five steps

The steps are listed from top to bottom on the left of the studio. The current step is highlighted and finished steps are ticked.

  1. Check the five steps on the left: PPTX upload, Template, Presenter, Slides and script, and Finish. What you chose is shown in small text under each.
  2. The top of the screen also shows the current step, such as Step 4 / 5, Slides and script.
  1. Check Check the five steps on the left: PPTX upload, Template, Presenter, Slides and script, and Finish. What you chose is shown in small text under each.
  2. Check The top of the screen also shows the current step, such as Step 4 / 5, Slides and script.
Step 4, Slides and script: slide list on the left, preview in the middle and the four lines of slide 1 on the right.

Check Click a step name to move to that screen. We revisited steps 1 to 3 after finishing; just looking did not change anything.

STEP02

Read the script for each slide

When every slide shows Audio ready, review the content. Select a slide on the left to see its appearance in the centre and its script on the right.

  1. Click the slide you want to review.
  2. Check how the slide, presenter and captions look in the centre.
  3. Read the script on the right. Always check numbers and names against your slides yourself.
  1. Action Click the slide you want to review.
  2. Check Check how the slide, presenter and captions look in the centre.
  3. Check Read the script on the right. Always check numbers and names against your slides yourself.
Step 4 with the script and narration ready for slide 1.

Check In this example the script was a spoken-style explanation based on the slide text. Slide 1 was a single 17.8 second line beginning with a greeting. Estimate at the upper right shows the expected total length.

STEP03

Check completion and open the track editor

When every stage is ticked and the heading says the video is ready, it is complete. Review the summary below.

  1. Check that every stage, including Avatar generation (GPU) and Video export, is ticked.
  2. Check the number of slides and lines and the total length: five slides, 23 lines and 3 minutes 20 seconds here. The Video row shows Exported.
  3. To check the ending and save the file, click Open MotionVox editor.
  1. Check Check that every stage, including Avatar generation (GPU) and Video export, is ticked.
  2. Check Check the number of slides and lines and the total length: five slides, 23 lines and 3 minutes 20 seconds here. The Video row shows Exported.
  3. Action To check the ending and save the file, click Open MotionVox editor.
All automatic steps completed and the video exported.

Check Watch the finished video next to it opens the video in a new browser tab, with sound. One row of the summary that shows an internal classification is painted over in the figure.

STEP04

The Finish screen after the video exists

When you open the studio after the video is finished, step 5 shows a summary of what was made and the actions you can take next.

  1. Check the five boxes at the top. This example shows 5 / 5 slides, 23 lines, Sophia with Kasumi Nagisa, 23 / 23 lines of narration (about 02:37) and a total length of 3:20.
  2. The Watch the finished video card shows when it was exported. Clicking it plays the video on this screen (sound will play).
  1. Check Check the five boxes at the top. This example shows 5 / 5 slides, 23 lines, Sophia with Kasumi Nagisa, 23 / 23 lines of narration (about 02:37) and a total length of 3:20.
  2. Check The Watch the finished video card shows when it was exported. Clicking it plays the video on this screen (sound will play).
Step 5, Finish, after the video was created: readiness at the top and action cards below.

Check Each card on this screen is explained in “Create the video in Finish”.

BEFORE YOU FINISH

One final check.

Once you know the path, start with “Load a PowerPoint deck”.

Continue with

Load a PowerPoint deckChoose how the slides are shownCreate the script and narration automaticallyChoose the presenter and voiceFind your way around the Slides and script screenSplit a long line into sentencesRewrite a lineUse a different caption textSet speed and body motion line by lineEmphasize key parts of a slideCheck everything with Play throughCreate the video in FinishFinish in the track editor and save the MP4

About this feature: PowerPoint to video →

Scroll the enlarged image to explore